Pro Foam Ultra One Shot
For Non-Organic Based Soil
64 Ounces (NOTE: Selling point, as most other products are only 32-ounces)
Designed for use on:
Patio Furniture – Concrete Floors & Walkway – Kennel Floors & Walls – Vinyl & Wood Fences – Wood Decks & Patios – Painted Surfaces – Awnings & More!
Pro Foam Ultra is designed to lift and emulsify encrusted soils on hard surfaces for the removal of grease, protein-based soils and organic residues from vertical and horizontal surfaces. Its high foaming properties allow Pro Foam Ultra to cling to all surfaces, providing excellent cleaning action. Pro Foam Ultra is nonflammable and nontoxic. Pro Foam Ultra may be used in a variety of cleaning applications where its high detergency and foaming will get the job done.
Apply and rinse the solution with one easy-to-use applicator!
- Treats up to 3,000 square feet per 64-ounce bottle! Pro Foam Ultra with Hose End Applicator.
- Container Size: 64 Ounces (NOTE: Selling point, as most other products are only 32-ounces)
- Professional strength formula, in an Easy-To-Use Wash & Rinse Applicator!
- Attaches to your garden hose!
Before Getting Started: Turn the spray setting to the OFF position. Attach the sprayer to your garden hose. Turn on water source.
Surface Cleaning Directions: (patio furniture, awnings, fences, walls, etc.): Remove loose debris and heavy soil from the surface. Turn the spray setting to the CLEAN position. Apply the solution from the top or back of the surface, working down and out. Turn the spray setting to the OFF position. If needed, agitate the surface using a synthetic brush. Allow the solution to stand for 3 to 5 minutes. Turn the spray setting to the RINSE position and thoroughly rinse the surface. Turn the spray setting to the OFF position.
Floor Cleaning Directions: If present, remove pets from the area. Remove and discard solid waste and dirt. Turn the spray setting to the CLEAN position. Working from the furthest section of the area and moving backward, applying the solution to the surface. If needed, agitate the surface using a deck brush. Allow the solution to stand for 3 to 5 minutes. Turn the spray setting to RINSE position. Moving towards the starting point and holding the sprayer 12 to 24 inches from the surface, thoroughly rinse the surface. Turn the spray setting to the OFF position.
Pet Safety: Allow the surface to dry thoroughly before returning the pet to the area.